IANZ Certification of Process gauges

In stock


This level of certification is for gauges like our range of standard mechanical gauges ie P4000 and Q6000.

CPS can carry out the certification of your gauges quickly and accurately, using air or water. The pressure range will determine which piece of equipment we use for this calibration. We can do full repairs and adjustments.

For most calibrations we use our very own CPS comparator. We can undertake calibrations from below zero right up to 2000 bar (30000 PSI).
Turnaround is normally 2-3 days. Urgent calibrations can be undertaken if required for a small surcharge. Also we can carry out onsite calibration if necessary. Each item calibrated is issue with an IANZ endorsed calibration certificate.

Click on the Technical information link for full details of the calibration of your test gauge as well as which piece of equipment we use for each particular calibration and our capabilities in testing.

If you need a special calibration done or what it same day just give us a call I’m sure we can help.

The above pricing is for pressures up to 1000 bar for pressures from 1001 bar to 2000 bar the cost is $350.00

Product code: CPS IGC

Options Available

Gauge Range < 1000 bar

Techinal Information

4 Bar to 1000 bar or 400 kPa to 100000 kPa:
We use a range of special trimmed XP2i’s that has been upscaled to have a delivered accuracy approaching 0.06% of reading. better than many dead weight testers.

-.15 Bar to 4 Bar or -15 kPa to 400 kPa:
For these low pressure gauges we use the DHI PPC3/PPC4 pressure controller. This is mainly used for high accuracy calibration and handles this type of work with ease. It has a delivered uncertainity of 0.008% of reading.

1000 to 2000 Bar or 100000 kPa to 200000 kPa:
For these ultra high pressures we use our highly accurate DHI PG7302 piston gauge. This has a delivered accuracy of 0.002% of reading. It is a complete overkill for this kind of work so handles it with ease.

You may also need


There are no reviews yet.

Be the first to review “IANZ Certification of Process gauges”

Your email address will not be published. Required fields are marked *