Description
The Fluke 787 was the first tool to combine a DMM and a loop calibrator to give process technicians double the power in one tool. Now it’s even better, the range is extended with the new Fluke 789 – the ultimate loop calibration multimeter. The Fluke 789 has a 24-Volt loop supply reducing the need for taking a separate power supply when doing offline transmitter testing. And with its built-in, selectable 250-Ohm Hart® resistor, it also eliminates the need to carry a separate resistor with you. Now process technicians can do a lot more while carrying a lot less. Each 789 can be supplied with a CPS calibration certificate which gives you piece of mind that the calibrations you are doing are correct. For more information on the 789 please click through to the Fluke web site, there is an extensive range of accessories for your 789, all to make your job easier.
Product code: Fluke 789
Additional information
| OPTIONS AVAILABLE | Fluke 789, Fluke 789 with IANZ Cal Cert |
|---|
Technical Information
Technical Information
SPECIFICATIONS
CURRENT MEASUREMENTS Range 0-1 A AC or DC
Resolution 1 mA
Accuracy 0.2% + 2 LSD (DC)
Range 0-30 mA
Resolution 0.001 mA
Accuracy 0.05% + 2 LSD
CURRENT SOURCING Range 0-20 mA or 4-20 mA
Resolution 0-05% of span
Drive Capability 24 V Compliance or 1200 Ω @ 20 mA
FREQUENCY to 19,999 kHz, 0.005% + 1 LSD
CONTINUITY Beeps for resistance less than 100 Ω
VOLTAGE MEASUREMENT Range 0-1000 V AC (true-rms) or DC
Resolution 0.1 mV to 1.0 V
Accuracy 0.1% Rdg + 1 LSD (VDC)
RESISTANCE MEASUREMENT to 40 MΩ, 0.2% + 1 LSD
DIODE TEST 2.0 V shows diode voltage drop
DISPLAY CURRENT AND 1% OF SPAN Yes
AUTO STEP, AUTO RAMP Yes
FOR FULL SPECIFICATIONS REFER TO MANUFACTURERS DATA SHEET
Reviews
There are no reviews yet.