Additel 160A Compound & Differential Pressure Modules

In stock


Additel manufacture a range of Intelligent external pressure modules which connect digitally to their pressure calibrators and process calibrators. These modules are not device dependent so all their calibration settings and data is enclosed in the module.

By utilizing these pressure modules you have the ability to expand the useable range of your calibration equipment especially when using the 760 or 761 pressure calibrators.

If you only have a little amount of pressure calibration work or work in pressures above 40 bar then a 223 or a 222A with a module or two may be a better solution, combined with a one of our hand pumps all supplied in a CPS protective custom case.

Additel manufacture the compound ranges ( which cross over zero ) in a number of ranges to help you with that pressure and vacuum calibration work you may be undertaking.

The Differential are for when you are doing some very low pressure calibration work and wish not to have the low side of the device you are testing open to atmosphere, or you may wish to do some raised line pressure calibration work. Then you would need one of these modules.

Each and nearly every 160A pressure can be supplied with its very own IANZ endorsed calibration certificate so you know the measurements you are making are correct.

To see the pressure ranges available please check on the “option available” drop down above.

Product code:


-16 to 16 kPa, -35 to 35 kPa, -70 to 70 kPA, -100 TO 100 kPa, -100 to 200 kPa, -100 to 700 kPa, -100 to 2000 kPa, -2.5 to 2.5 mbar, -5 to 5 mbar, -10 to 10 mbar, -25 to 25 mbar, -50 to 50 mbar, -75 to 75 mbar, -160 to 160 mbar, -375 to 375 mbar, -700 to 700 mbar

Technical Information


There are no reviews yet.

Be the first to review “Additel 160A Compound & Differential Pressure Modules”

Your email address will not be published. Required fields are marked *