Description
Compact and robust measuring device for fast evaluation of material moisture in firewood, timber, GIB board, inlay, plaster, cement and lots more.
A suitable characteristic is selected with help of a material table on the rear side of the device before measuring. The material is contacted by pressing the measuring needles into it. The measured value is Displayed only a short time afterwards.
The device is designed for precise love especially firewood and timber measurements, HOWEVER, a lot of additional building materials can be rated.
-Material tables on rear side of device
-Integrated, exchangeable measuring needles
-Moisture rating (wet / dry) via bar graph
-Display of material moisture or water content
-Integrated temperature compensation
-Characteristic curve display
Technical Information
Technical Information
- Measurement Principle: Resistive (electrical resistance-based) moisture measurement
- Measurement Range:
- Material moisture: 0.0% to 100.0% (depending on material characteristics)
- Material Groups:
- Wood: 3 groups covering 130 wood types
- Building materials: 8 characteristic curves (e.g., cement screed, concrete, plaster, limestone)
- Accuracy: ±0.1% (typical, varies by material and calibration)
- Resolution: 0.1%
- Probes: Integrated, replaceable steel measuring pins (12 mm penetration depth)
- Display: LCD with bar graph for wet/dry evaluation
- Temperature Compensation: Automatic, integrated
- Operating Temperature: -5°C to +50°C (material must not be frozen)
- Power Supply: 9V battery
- Dimensions: Approx. 147 x 75 x 25 mm
- Weight: Approx. 140 g (with battery)
- Protection Rating: IP40 (dust-resistant, not waterproof)
