63mm Brass/Stainless Bottom Entry Gauge

In stock


The Q2500 Series gauge is the smaller version of our Q4000 Series. This gauge has a sealed stainless steel case and is liquid filled. It is suitable for the harshest of conditions. This is a very popular pressure gauge and suitable for nearly all applications where you need a low cost but long-life 63mm gauge. A wall mounting flange is available for mounting these gauges to a wall.

The gauge is standard with bar/PSI but we also do some PSI/kPa ranges as well – check out the options tab above.

We can supply these gauges with a IANZ endorsed calibration certificate to give you that extra piece of mind that the measurements you are making are correct.

The Q2500 Series is the ideal gauge for pumps, filters, air compressors, hydraulic systems, or any industry where you need a small, easy-to-read, long-life pressure gauge.

Please click on the options available tab above to see the ranges we hold in stock, if you can’t see the range you require contact us and we will order (min order 50 units) in the exact range you need.
Product code: Q2500 Series


Q2500BP: -1-0 bar/inHg, Q2500KP: -100-0 kPa/inHg, Q2502BP: -1-1.5 bar/psi, Q2503BP: -1-3 bar/psi, Q2504BP: -1-5 bar/psi, Q2505BP: -1-9 bar/psi, Q2506BP: -1-15 bar/psi, Q2507BP: -1-24 bar/psi, Q2510BP: 0-1 bar/psi, Q2510KP: 0-100 kPa/psi, Q2512BP: 0-2.5 bar/psi, Q2513BP: 0-4 bar/psi, Q2514BP: 0-6 bar/psi, Q2515BP: 0-10 bar/psi, Q2516BP: 0-16 bar/psi, Q2516KP: 0-200 psi/kPa, Q2517BP: 0-25 bar/psi, Q2518BP: 0-40 bar/psi, Q2519BP: 0-60 bar/psi, Q2519KP: 0-1 000 psi/kPa, Q2520BP: 0-100 bar/psi, Q2521BP: 0-160 bar/psi, Q2522BP: 0-250 bar/psi, Q2524BP: 0-400 bar/psi, Q2525BP: 0-10 000 psi/kPa

Technical Information

The Q2500 series is one of our most popular gauges so we have many options available

Back flange: Used for mounting the gauge to the wall.
¼ BSPT thread is standard but we can do NPT and BSP – just ask. 1/8 BSPT thread is also available.

We stock and extensive range of these gauges and can even supply custom gauges to your exact requirements with your logo and special markings just ask.
Can supply the gauge with a red mark or even a Glass lens.
Gauge comes liquid filled as standard. With Stainless case, brass internals and plastic lens.
Dial is plastic so will not handle high temperatures, we suggest rather using a P4000 gauge.
We can supply the gauge with a calibration certificate if required.
We can even repair and adjust these gauges if needed.
Gauge is suitable for pumps and filters and nearly every gauge application.
The full range is stocked by CPS for immediate delivery.


There are no reviews yet.

Be the first to review “63mm Brass/Stainless Bottom Entry Gauge”

Your email address will not be published. Required fields are marked *