63mm All Stainless Rear Entry Gauge

In stock
N/A ,

Additional information


P2550BP: -0.00 bar/psi, P2550K: -100 to 0 kPa, P2554K: -100 to 500 kPa, P2560BP: 0-1 bar/psi, P2560K: 0-100 kPa, P2561BP: 0-1.6 bar/psi, P2561K: 0-160 kPa, P2562BP: 0-2.5 bar/psi, P2562K: 0-250 kPa, P2563BP: 0-4 bar/psi, P2563K: 0-400 kPa, P2564BP: 0-6 bar/psi, P2564K: 0-600 kPa, P2565BP: 0-10 bar/psi, P2565K: 0-1000 kPa, P2566BP: 0-16 bar/psi, P2566K: 0-1600 kPa, P2567BP: 0-25 bar/psi, P2567K: 0-2500 kPa, P2568BP: 0-40 bar/psi, P2568K: 0-4000 kPa, P2569BP: 0-60 bar/psi, P2570BP: 0-100 bar/psi, P2571BP: 0-160 bar/psi, P2572BP: 0-250 bar/psi, P2574BP: 0-400 bar/psi, P2575BP: 0-600 bar/psi, P2576BP: 0-1000 bar/psi

Technical Information

The P2550 series is a stainless steel pressure gauge i.e. has stainless steel internals as well as a stainless steel housing. These gauges are mainly used in the process industry for chemical applications where you need a small gauge with Stainless internals.
The case is sealed but the gauges can be repaired here at CPS if required.

These are similar to the Q2500 series so can take the same mounting options as listed below:
I.e. 3 hole front flange for mounting gauge into a panel.
U-clamp: similar to the 3 hole front flange but easier to mount.
Back flange. Used for mounting the gauge to the wall.

¼ BSPT thread is standard but we can do NPT and BSP – just ask. 1/8 BSPT thread is also available.
Can supply the gauge with a red mark or even a Glass lens.
Gauge comes liquid filled as standard.
We can supply the gauge with a calibration certificate if required.
Gauge is suitable for pumps and filters and nearly every gauge application.
Dial is plastic so will not handle high temperatures, we’d suggest using a P4000 gauge.
For special or OEM applications we can order in the exact gauge to fit your requirements we just need a minimum order of ten units. We can even do them with your logo if required.


There are no reviews yet.

Be the first to review “63mm All Stainless Rear Entry Gauge”

Your email address will not be published. Required fields are marked *